5-Channel Digital Amplifier 150W x5 @ 2, 4 and 1 Ohm and 500W x1 @ 2 Ohm RMS Power - S91100.5D

5-Channel Digital Amplifier 150W x5 @ 2, 4 and 1 Ohm and 500W x1 @ 2 Ohm RMS Power - S91100.5D

1-Channel 1600W @ 1/2/4 Ohm Stroker Pro Series Digital Amplifier w/ Bass Control Knob - SPRO1600.1D

1-Channel 1600W @ 1/2/4 Ohm Stroker Pro Series Digital Amplifier w/ Bass Control Knob - SPRO1600.1D

1-Channel Digital Amplifier 1000W x1 @ 2 and 1 Ohm RMS Power - S91000.1D

1-Channel Digital Amplifier 1000W x1 @ 2 and 1 Ohm RMS Power - S91000.1D

5-Channel Digital Amplifier 150W x5 @ 2, 4 and 1 Ohm and 500W x1 @ 2 Ohm RMS Power - S91100.5D

$769.99
Availability: In stock
SKU
S91100.5D

S91100.5D - 5-Channel Digital Amplifier 150W x5 @ 2, 4 and 1 Ohm and 500W x1 @ 2 Ohm RMS Power

STROKER STROKER series amplifiers has established an unsurpassed reputation for high performance, quality, efficiency, and reliability. STROKER series amplifiers are designed and engineered with having massive dynamic headroom capability so you will always get way more power than its standard power ratings. Extra power means crisper and cleaner amplified signal for a tremendous sounding audio system. STROKER series amplifiers showcases its flexibility by generating very consistent power output at different impedances and with its variable phase adjustment on the mono-block amplifiers, the magical shifting of low bass can be shifted from the trunk to the front of the vehicle so you can not only hear it, but feel it!

Features:

  • Latest High-Efficiency Full-Range Digital Topology
  • Surface Mount Component Technology with 4-Layer PCB
  • Common Compact Size with Single-Sided Connections and Top    Mount Controls
  • Handles HI and LO level input up to 12V
  • Switched Speaker Level Turn On Option (VOX/DC Offset/REM)
  • Input configuration switch on 4 and 5 channel amplifiers
  • Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers
  • Lighted LED logo
  • Bass remote can be disassembled and installed in-dash
  • Variable Phase adjustment on ALL S9 series mono blocks to get the correct phase. Moves bass from the trunk to the front.
More Information
Model S91100.5D
RMS Power (4Ω) 90 W x 4 / 150 x 2
RMS Bridge (mono 1Ω) N/A
RMS Bridge (mono 2Ω) N/A
RMS Bridge (mono 4Ω) 300 W x 2/500 W x 1 (Ch 5/6 bridged) (4 Ω ONLY)
Types Full Range, Class D
Power Supply Full PWM
Power Supply (Threshold) 10.0DVC – 17.0DVC
Idle Current (0.7A)
Distortion - THD (1KHz@4Ω) 0.03%
Distortion - S/N Ratio (A weight @ 1W) -76.7dBA
Distortion - S/N Ratio (A weight @ FP) -96.7dBA
Input Sensitivity - Hi/Low Input Level YES – UP to 25 W RMS / 0.2mV – 10.0V
Input Impedance - Low Input Level 22 KΩ
Output Impedance 0.051 Ω
Damping Factor (50Hz@4Ω) >70
Bandwidth (-3dB) 10Hz-35KHz
Crossover (-12 dB/ Oct) Variable High-Pass 35Hz-350Hz
Crossover (-12 dB/ Oct) Variable Low-Pass 35Hz-350Hz
Crossover (-12 dB/ Oct) Variable Sub-Sonic N/A
FUSE Ratings - ATC 3 x 30A
Dimension - Length x Width x Height - Inches(mm) 14.1 x 7.25 x 2.0 (358.14 x 184.2 x 50.8)
Write Your Own Review
You're reviewing:5-Channel Digital Amplifier 150W x5 @ 2, 4 and 1 Ohm and 500W x1 @ 2 Ohm RMS Power - S91100.5D